The LRX SINGLE is a completely self-contained robotic lighting system. The LRX SINGLE lamp fixtures are designed to work with existing cables, power supplies and industry standard dimmers.
Set-up is so efficient that it takes only minutes.
Switching the lamp fixture from HMI (daylight) to tungsten is handled automatically in the LRX SINGLE, all you do is change the bulb and power supply; the LRX SINGLE will do the rest. The LRX SINGLE is so versatile it can be used as a daylight source at the beginning of the day and switched to an incandescent source part way thru the workday in a matter of minutes.
The LRX SINGLE lighting system comes complete with a robotic lighting head, integrated gel frame holders, DMX hardwire remote control, DMX cable and a shipping case. There is an optional condor mounting system and cable management system that is exclusive to LRX.
Each LRX SINGLE lamp fixture will accept a standard single-ended 6K – 12K -18K HMI (daylight) or 12K Tungsten bulb. For maximum unrestricted output, it is paired with a radiant-engineered parabolic reflector that allows the lamp fixture a smooth transition between a very narrow spot and a smooth wide flood.
The lamp body is mounted to our robotic yoke, which provides a wide range of tilt, pan, spot and flood functions from a hardwire remote control. The LRX SINGLE can be mounted on most aerial lifts, rooftops, grids, etc. Positioning the LRX SINGLE can be done safely and exactly where you want it.
The LRX SINGLE gel frame holder is mounted to the front of the lamp housing so that it moves with the lamp as it tilts and pans. The gel frame holder is engineered and constructed to quickly and easily accept any combination of color, diffusion, and heat shield on a thirty-inch square gel frame. Light reflected from the lamp side of the gel is prevented from escaping outside of the housing, so that the light is exactly where you want it.